Making a Cinderella Inspired Dress, Part Two

DSC_4281RESIZEThis is part two about making my Cinderella inspired dress! It feels a bit weird to be blogging about this now, because I actually finished this several weeks ago. I need to up my blogging game, I’m so behind!

Anyway! This is part two and will focus on making the skirt. Part one can be read here, and it shows the process of making the bodice.

I’m actually using a piece of an old costume as the skirt for this one. Last year I made a medieval inspired suit based off of one worn in the show “Game of Thrones” I love the design of this piece but while making it pretty much everything that could go wrong went wrong.

The end result was too small at the shoulder, way too narrow in the sleeves, and landed a couple inches above my waistline. It looks okay on a dress form but is completely unwearable. You can see a picture of that here.

I decided to disassemble it and use the skirt as a base for this dress. Luckily the sleeves had enough fabric in them to make the bodice and matching headband!

Though I never posted the “Making of” post about this project, I do have a few progress photos of how I did it. These photos are less than a year old which seems so crazy, my progress photo quality has increased so much. Vacuuming regularly and seeking out natural lighting has done wonders for them.

The skirt is a basic circle skirt. I cut this pattern out on the fold, twice, so I had a full circle skirt.

DSC_6462

The skirt was hemmed with two inch wide horsehair braid, which was turned over and hand stitched into place. The seams were sewn normally, but bound with blue quilters cotton.

DSC_6464

And that was pretty much it! There was a six inch slash down the back to allow me to take it on and off…and I don’t have anything else to say about it!

DSC_6472

It was sewn onto the bodice of that costume, so I had to use a seam ripper to detach it for this project. Then I draped it over my petticoat (which I talk about making here) and the results weren’t so great. It was too long in the front and too short in the back, which was bad.

DSC_3728

To fix it I opened up the back seam and lowered the back half by a couple inches. I added a panel to the waist so it would sit this way permanently. I lifted the front by an inch and a half, then sewed a gored panel into the center back.

DSC_3730

It wasn’t too pretty at the top but the hem rested evenly!

DSC_3731

That meant I could move onto making the overlay. I bought a glitter organza with this in mind. Unfortunately it wasn’t the right fabric for an overlay, despite the sheerness. The organza had so much volume, it wanted to stick straight out like a tutu instead of draping over the skirt. I tried steaming it but that didn’t help at all.

I decided to stitch the organza to the underside of the circle skirt hem. It wasn’t the look I wanted, but it’s better than a tutu!

The overlay pattern is really basic, it’s made up of several rectangles.

DSC_3745

Those got french seamed together because this fabric frays horribly. It also sheds a lot, I tried hairspraying it at several stages and it didn’t help at all. You can’t touch it without being covered in glitter and when I walk around in the finished dress there is a little “Fairy Trail” of glitter that gets left behind.

DSC_3748

I pinned the lower edge of organza to the underside of the circle skirts hem.

DSC_3750

I used something resembling a whip stitch to hold it down. In this photo you can see how fancily I finished the circle skirts hem! I remember this taking me ages at the time, because it was one of my first cross stitch hem attempts. I think I watched like two seasons of American Pickers during the process haha.

DSC_3755

The top of the organza got gathered down to twenty seven ish inches. Then it was sewn onto the waistline of the circle skirt.

DSC_3758

I cut a slit down the back of the skirt to allow me to get in and out of it. Then I basted the layer of organza around it.

DSC_3759

I stitched bias tape around the edges, and turned it under.

DSC_3762

I had cut my overlay a little long, to correct this I gathered it over an inch away from the edge. Once it was attached to the skirt I decided to trim it down.

DSC_3763

And I had a functional, really pretty skirt!

DSC_3764

Even though this glitter pattern is a pain in the ass it’s so pretty.

DSC_3765

Now it was time to make the panniers! I used the same method for making these as I used with my Halloween Inspired dress which means they are made from rectangles.

DSC_3783

One of the longer edges gets hemmed, then the other three edges are gathered down. Mine were gathered down to twelve inches, and the end result looks like this!

DSC_3809

I sewed these onto a piece of ribbon, to keep them separated by the correct amount.

DSC_3810

The ribbon got pinned onto the skirt, then sewn. I tacked the panniers down in a few spots to make them lay nicely, and that was it! The skirt is complete! I love how it looks.

DSC_3812

But I wasn’t done yet. The skirt got sewn onto the bodice, then a zipper was added up the back. Both of these things went well, it was the whole trying it on part that went badly. By that I mean, I couldn’t really get it on. I decided to take out the zipper and do a lace up back. No problem!

Okay there was a little problem. I measured wrong. My eyelets were marked incorrectly and this fabric did not take eyelets well. I couldn’t heat my iron to a high enough temperature to attach interfacing (thicker fabric = easier to make smooth eyelets) without burning through the organza. So I was either going to have uneven, ugly, eyelets, or a bodice that didn’t fit.

Then my dad jokingly said “You should cover it with lace” which was brilliant. 

I let the dress out by and inch with folded strips of fabric.

DSC_3818

Then zipper got sewn in again. I tried on the bodice and it fit! So I covered up the failed attempts at eyelets with silver lace.

DSC_3820

It looks a little odd. Not ideal at all, but it totally worked.

DSC_3821

I stitched the lining in, which covered the raw edges of the skirt waist and the raw edges from letting the bodice out.

And with that my dress was done!

Back:

DSC_3826

Front:

DSC_3827

And here is how it looks worn! The headband is a plastic one I got from walmart. I covered it with two layers of quilt batting, then stitched the satin backed metallic fabric over it. The underside was pretty ugly so I lined it with more of that fabric.

DSC_4245RESIZE

DSC_4281RESIZE

DSC_4279RESIZE

I have some final thoughts about this project which I would like to share. This may sound a bit negative, but I think it’s important to mention.

I wish I had stuck to my original plan. In the first blog post about this project I shared a sketch of what I had planned for this dress. I wanted to make a dress using the colors of the animated gown, and was going to style it to look like Cinderella (the headband and silver shoes). It would have a very full skirt and “Princessy” qualities, but the similarities would end there.

Somewhere along the way I changed my mind and ended up with something that is more than a Cinderella inspired dress, it’s really just a shorter version of the dress in the film but with more sparkle.  I LIKE the dress and I love the fabrics, but I wish I had committed to my original design – which was a lot more original and way more flattering.

Anyway! That’s all I wanted to say about that. There is a video about making this skirt too, which can be watched here if you are interested!

Thanks for reading!

Advertisements

29 thoughts on “Making a Cinderella Inspired Dress, Part Two

  1. Charity says:

    I actually really love the addition of the lace down the back. It makes the dress much more interesting and unique! The whole thing turned out really pretty.

  2. Katrina says:

    I love the lace! I would actually put some down the front as well, it would make the dress more unique, but even so it is a beautiful dress.

  3. iamthebambi says:

    This is absolutely gorgeous! I work at Disney World and see guests dressed as characters all the time, but this definitely blows them all out of the water! Stunning!

  4. Karen K. says:

    I too, love the lace on the back! I think it looks great. An absolutely beautiful dress! You would make a wonderful Cinderella! The dress is perfect and you look fabulous in it! Now you just need a few pet mice and a pumpkin! 😀

    • Angela Clayton says:

      A couple people have said that, it’s funny how things work out! Thank you! Haha, I have a couple in my stuffed animal collection I could have used, but that wasn’t the look I was aiming for.

  5. Meldy says:

    Can you leave a tutorial on how to do the hair as well, It is probably not that complicated but it is beautiful.

  6. ElfQueen says:

    This dress is adorable! I feel like it would be perfect for a Cinderella ballet costume! ballet costumes need to be short so you can see their dancer’s legs so this would be perfect for that.

  7. Ellie D says:

    I NEED to know where you got that wig! D:

    I love absolutely everything about this outfit. It’s so gorgeous!

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s