1918 Ensemble, Dressing for Downton

November 26, 2017March 4, 201817 Comments

Today I’m dipping my toes into 1918, and the wonderful fashions it has to offer.

I actually researched this period quite heavily earlier in the year when I was pursuing a design job for something set in the early 20’s. The job didn’t work out, and it left me a little bitter towards the era. But this weekend my mom and I booked tickets to the Downton Abbey Exhibition and I thought it would be fun to wear an understated period costume to the event.

The late nineteens are a perfect period for casual historical dress since the silhouette (though more modest than what is fashionable now) wasn’t dramatic like the early 1910’s, or the later 1920’s. Though corsets would have still been worn during this period, waistlines were starting to widen and you can get away without one. Perfect since I would have to wear this for four hours of public transit!

(it was also 2 days after Thanksgiving so a corset would not have been welcome regardless of the wear time…)

I based this ensemble mostly off of two ads: This one for the blouse, and this one for the skirt. I also made a coat to wear over it, which was based on ones from a winter Sears catalogue.

I had all the materials for this on hand, and made it over a 4 day period (some of those were half days with Thanksgiving and all). I’m really pleased with the end result and this may motivate me to make more vintage themed clothing to wear on a regular basis!

…

I started with the first piece: the camisole.

I draped this on my dress form. Getting the right amount of flounce at the hem to create the proper silhouette was probably the most difficult part.

This is it transferred to paper.

The body of the camisole is made from silk charmeuse. This particular cut was *very* off color, so one side is more yellow than the other, but it’s only really noticeable at the back.

I sewed a strip of wide cotton lace into the center (backed with more charmeuse) to serve as the statement of this blouse.

I’m not sure when this lace is from, but it came from a collection that included pieces from 1910. Based on the design and weight I would not be surprised if this lace was also from that period. I outlined it with some zig-zag edging to add a bit more texture.

The collar of the camisole is also charmeuse, but I backed it with fusible interfacing. Then I stitched a half inch away from each edge, and used that as a guide when turning the edges inward.

It was pinned to the top edge of the camisole, with the right side facing the wrong side. Once turned the right way out all the raw edges will be hidden!

Then I topstitched the bottom edge down.

The bottom edge was gathered slightly at the front and sewn to an interfaced waistband.

The final addition were straps, made from bias cut strips sewn into tubes.

The back closes with three glass buttons. This is the first time I’ve done functional button holes in…3 years? Maybe longer?

I finally bought a home sewing machine, which though slower than my industrial, has some stitches and features that I’ve missed! The automatic buttonhole is one of those things.

It is a SINGER 4423 Heavy Duty *, if you were wondering. I go more in depth about it (and all my sewing machines) in this video.

I used the camisole as a base for draping my next pattern: the blouse. I believe these pieces would have been combined in the 20’s, with a closure hidden on one side. But I thought making them separate would make the pieces more versatile. And the camisole also provides enough coverage that I didn’t need to wear a slip over my bra.

Here is the pattern I ended up with. It’s shaped by pleats below the shoulder with a drawstring waistband.

I cut all the pieces out from a thin, crisp, silk shirting. This fabric was a dream to work with – I’ve never had something make french seams easier!

I didn’t take a lot of progress pictures for this, since it came together in a single evening. But here you can see the main pieces assembled. All the edges were finished by machine with rolled 1/4″ hems. Seams were flat felled, or finished with lace binding. And the bottom edge was turned inward to create a channel for ribbon.

I tried to draft the sleeve pattern for this the historical way, but I got confused and made it up instead. This worked surprisingly well! Fit the armscye perfectly on my first try. I just had to adjust the length and width a little.

The cuffs were gathered by machine.

Then sewn onto the cuffs. The raw edges were bound with lace binding. I wanted to add button closures but didn’t get the buttons (or know what size they would be) until the day before wearing this piece, so I used hooks instead.

The sleeves were sewn on by machine, then the raw edge was bound.

I also made the collar. This was assembled from a layer of the checked silk, which was backed with interfacing, and a layer of silk charmeuse, which was supposed to be lining. I sewed the layers together with the wrong sides facing each other, then topstitched around the edge.

It looked great! Until my iron smeared burned goop all over the corners of the checked side. I couldn’t get it off, and I didn’t have a lot of fabric left…so I made the charmeuse side face out instead. I actually really like the contrast of this, so it was a happy accident. But it means the topstitching looks a little sloppy since it was originally done on the other side.

I sewed the collar on by machine, then tacked it down a half inch away from the edge to keep it in place. The final touch were silk covered 3/4″ buttons. Three on either side of the bodice, and two on each cuff.

I also added a snap just above the top button to secure it to the camisole.

And the back! I didn’t expect to love this as much as I do, but I’m really happy with it. It’s delicate yet structured and so different from anything I’ve done before.

I usually shy away from thin or slippery fabrics, unless I’m using them as an overlay. But making a tailored piece out of them was surprisingly easy and fun – I think this will motivate me to branch out more with my fabric choices.

…

Unfortunately the skirt didn’t go as well. At all. My first attempt was made from a beautiful wool, but the finished skirt looked awful. It had a wide, rounded waistband that made me look so heavy.

There was also way too much fabric, and it drooped at the seams. It was supposed to have pockets, which I tried making out of a contrasting wool, but then there was way too much contrast. So I remade them from matching fabric and it looked even worse! The whole thing was an unsalvageable mess.

Attempt number two was made in three hours from a purple chevron fabric I got from the plaiditudes collection at Jo-anns. I draped the skirt design on my dress form, then used the muslin as a pattern, adding seam allowances by eye. It was SO messy, but the end result turned out a million times better than my first attempt.

This skirt has way less volume, and has pleats in the back instead of gathers. The waistband is still wide, but it’s straight which is a lot more flattering. And there is decorative seaming down the front instead of pockets.

It’s not my best work, but it fit, and it looked pretty good!

I think the same can be said about the jacket. This piece was actually drafted, partially assembled, and completely cut out over a year ago – I even made a video about it. I planned on this being my winter coat for 2016, but after buying a glorious winter coat from J-Crew I lost interest.

The jacket also had some issues I wasn’t happy with. I ran low on material so I couldn’t make the skirt as wide or long as I wanted (it actually has plenty of volume, so I’m sort of glad for that now). I also had to ignore the grain line on some pieces, and didn’t have enough left for a matching hat which I was originally really excited about.

Plus the topstitching on this jacket was plagued with problems. It kept skipping stitches, which meant I had to sew over them again, leaving backstitch marks. This was made worse by my plan to use contrasting stitching during construction.

Even though this was only a year ago, I’ve learned a lot about my machine since then and working with heavier fabrics in general. Unfortunately that helps me moving forward, not with the issues this jacket already had. To fix the topstitching I would have had to completely disassemble the bodice and remove it all by hand. And that still wouldn’t resolve the grain line or length issues.

But I already had a lot done. So I decided to take a half day and get it finished, fully knowing that it was impossible to make it perfect given its other issues.

Finishing it included:

Figuring out which pieces went together

Figuring out wtf I was thinking with the pocket design (the required topstitching would have sewn them shut..)

Sewing the entire bottom half together

Hemming it

Sewing the cuffs on

Attaching / lining sleeves

Attaching bottom half

Lining the waistband

Sewing in closures

Tacking the collar

Sewing on buttons

…in less than a day.

Surprisingly, it turned out okay! I’m not going to share close ups since the finishing isn’t great at all. The interior skirt seams were left raw, and the topstitching got a little messy at points. But it’s finished, and I love the shape and design of it. Hopefully I can reuse the pattern for a similar jacket, made to my current standards.

It’s a little wrinkly from yesterday.

And that is it! Four pieces in four days. All together I think they looked lovely. And it was surprisingly comfy and weather appropriate!

I accessorized the ensemble with a pair of Katie & Kelly shoes (these were like $12 on clearance at DSW last year) and the Authentically Academic bag from Modcloth. I had gloves from the 40’s with me too, along with a 50’s themed pair of Quay sunglasses…so it was a little all over the place, but very retro.

For my hair I slept with a mixture of 3/4″ and 1″ curlers in, all wound inward towards my face. In the morning I brushed them out, then tucked the ends under and pinned them to the base of my scalp.

Sort of how you would do a faux bob, but the volume from the curls makes it look more like a fancy up do. I teased my bangs a bit and pinned them to the side. Then sprayed my hands with hairspray and used them to smooth and flatten the top before setting it with a heavy misting. It’s probably more of a 40’s style than 1918, but I felt it looked passable.

Any loose bits are probably from me trying to adjust bobby pins after putting the blouse on and getting the buttons caught in it. That happened several times.

That is it for today! Thanks for reading!

My next post will be about the exhibit itself!

Making a Historical Swimsuit, 1910

June 30, 2017March 4, 201819 Comments

Since it is now officially summer (and disgustingly hot and humid), I’ve decided to spend this week focusing on some more weather appropriate projects.

And I’m starting with most summery of all projects: A swimsuit!

Or more specifically, an edwardian swimming costume based on examples from the early 1900s.

…

My original inspiration for this project was this picture. I saw it just before leaving for a trip to Jo-anns and instantly decided to add 5 yards of black cotton to my shopping list. It wasn’t until I got home and did more research that I realized that is not an Edwardian swimming costume – It’s a pair of swimming bloomers with a corset cover from an earlier period.

So I did a bit more research after that, and finally decided to base my ensemble on this garment. I also discovered some glorious sailor inspired suits, but I didn’t have suitable (heh, suitable) fabric for them.

In my research I also learned that swimsuits during the early 1900s were made out of wool. But I knew finding lightweight wool would be a challenge, and it would probably be a tightly woven suiting that didn’t have much texture to it.

In the end I bought a lightweight cotton, which might be a quilting cotton, but it has a strong sheen to it, almost like cotton sateen. I’m happy with this choice since it’s more interesting (and way cheaper) than matte black wool, but it wrinkles like crazy which isn’t ideal.

I also bought buttons, and stole a 1/2 yard of paisley quilting cotton from my moms stash, which will be used for binding.

Step one was draping. This has a flat back and collar, with a gathered front.

My fist mockup went surprisingly well! I had to lift the waistline slightly, but the amount of volume and gathering was perfect.

I started assembly by cutting out the collar pieces. They were sewn together at the centerback, then backed with interfacing. The piece on the left is the lining.

I sewed those together with the wrong sides facing each other.

Then bias binding was pinned and sewn on!

I folded the binding inward and stitched it down with whip stitches, so both sides of the fabric are nicely finished.

The front few inches of the bodice panels were backed with interfacing. Then these edges were turned inward in preparation for adding the closures.

I also gathered the top and bottom edges by hand.

I sewed the front pieces to the back pieces with french seams. Then I finished the arm openings with facings.

I sewed the collar on by hand. The raw edges from the bodice were turned inward and whip stitched down.

I didn’t love the sleeves on the extant garment I based this on, so I decided to make mine with more volume. I fiddled with the pattern for a while before settling on this. The top edge is straight, and the bottom is curved.

The pins were used to mark the right side of the fabric – the sheen of this fabric is definitely more prominent on one side, but not very visible in certain lightings, so I had to be careful!

The bottom edge was trimmed with bias tape – once again sewn on by hand. And the top edge was gathered slightly.

I sewed the side seams as a french seam, then stitched the sleeves to the bodice by hand.

I also sewed on all the buttons (which are decorative), and closures into the center front. The collar closes with hooks, and the bodice closes with snaps.

The “skirt” was draped out of some random cottons. I was very concerned about the shape of this – I wanted it to have some volume, but not flare out too much. I also didn’t have a ton of fabric, so I couldn’t make the panels too wide.

The skirt pieces were sewn together with french seams.

Then all the edges were trimmed with bias tape – once again stitched on by hand!

The skirt was gathered near the front, and at the back.

Then I sewed the skirt to the bodice with the wrong sides facing each other, leaving the raw edges facing out. The waistband will cover these later.

After a fitting I realized the skirt looked longer on one side than the other…despite them being the same length (trust me, I measured). So I sewed a dart into the top of one of the panels, making it a half inch shorter.

Now it was time for the waistband! This is made from a bias cut strip of printed fabric that has the edges turned inward, and an interfaced strip of black fabric with its edges turned inward.

I basted the strips together, then sewed them to the bodice by hand with tiny whip stitches.

The final step was sewing on two hooks – one at the front, and another where the waistband ends.

(It’s already wrinkly)

Now for the bloomers – because that bodice would be indecent without them! For these I used the bloomer pattern originally drafted for my cycling costume, I just made the pattern shorter.

However I also should have made the pattern narrower, these had way more volume than they needed.

I didn’t take very many photos of this process, but the pants were sewn together with french seams. To keep the front smooth, I moved the closures to the sides of the bloomers. To do this I left the tops of the side seams open, and sewed buttons and loops onto either side of the waistband.

The top edges were pleated to avoid excess volume under the bodice.

There are channels for the drawstring cuffs sewn five inches away from the hem of the bloomers. These were made out of strips of black fabric.

Then the bottom edges were finished with bias binding, and a ribbon was threaded through the channel. I left a 1″ gap in the side seam where the channel is, which allows the ribbon to peek out.

As a side note, to get the cuffs to stay where I wanted them, I had to tie the ribbon before putting the bloomers on. There was no way to tighten them enough to stay up while they were on my legs.

The top edge is finished with bias binding, and has the loops/button closure method that I mentioned earlier. Unfortunately these ended up being WAY to big for me, so I had to pin the sides when we photographed it. Definitely something to fix in the future.

Also, these bloomers ended up being ridiculously long. I made them 3″ shorter than my cycling bloomers, but cut another 5-7″ off before binding the waistline. They were so baggy it was ridiculous.

And that’s it!

All and all this was a fun, easy project. I’m happy with how the bodice fits, and how it all looks together. It isn’t the best thing I’ve made construction wise, but for $30 of fabric and 4 days of work I’m pleased with it.

I’ve already photographed this project, and here is a partially edited preview of it all together!

This photoshoot wasn’t very successful since it ended up being really sunny, and the beach I wanted to go to required permits we didn’t have. Hopefully I can edit out some of the harsher shadows and get the full set posted soon.

Thanks for reading!

Striped Cotton Dress, Early 20th Century, Photos

June 23, 2017March 4, 201821 Comments

A few weeks ago I got three projects photographed, including my Striped Edwardian Gown, which is the one I’ll be sharing photos of today!

I have two blog posts about making this dress and hat. They can be read here, and here.

This dress was such a fun project to work on, and I’m really happy with the end result. It fits nicely, I have a lot of mobility in it, and I think it looks quite authentic.

To add to the authenticity I decided to use my real hair for this shoot – and I’m so glad I did! It looks a lot softer and (for obvious reasons) more realistic than my wigs. My styling skills have ways to go, but I’m going to practice and use my hair more often with future projects.

As far as foundations go, I wore this costume over my white and pink chemise, my pink and white corset, a bust pad, and white chevron socks…And I’m just realizing I never blogged about any of those pieces. But you may have seen them in spotlight videos on my youtube channel.

Since the shoes show, I bought a pair of these* in white – which aren’t as comfortable as the black ones, but compliment the dress nicely. And these earrings* which are from the Downton Abbey collection.

I was so comfortable wearing this costume. I’m not sure that shows, but it was the best I’ve felt in a costume in a long time!

Now onto the pictures!

…

That’s it for this set, but I will have more to share soon! I haven’t been thrilled with what I’ve accomplished so far this year, and seeing photos of completed works makes me feel a bit better about things. So I have plans to take more soon.

Making a Striped Cotton Dress, Early 20th Century, Continued

May 16, 2017March 8, 20187 Comments

Last week I shared the process of making the bodice and sleeves for my striped edwardian dress. Today I’m writing about making the skirt, the hat, and the adding the finishing touches.

…

Let’s start with the skirt. This took me a while to “draft” because it’s so narrow – I’m used to making skirts that fit over petticoats or hoops, and without those as a base I felt a bit lost!

So I began by cutting a rectangle of material, then cutting it in half. Which left me with two 22″ x 45″ish pieces. I pinned one of the pieces onto the front of the dress form and played around with the amount of volume I wanted it to have.

Then I removed the panel from the dress form, trimmed the top edge, and gathered it properly. This was repeated on the other panel as well.

I cut out another rectangle, and while the fabric was folded in half I cut across it diagonally. This left me with three gored panels. I made sure all the diagonal cut edges were sewn to straight edges (to prevent warping), with the wider ends at the hem so it would have the most volume.

I didn’t photograph this process because my floor was really dirty, but you’ll see the skirt laid flat in a minute and hopefully it will make sense then!

Here is the top edge.

I pleated this edge so it would line up with the pleat at the back of the bodice.

Then gathered it down, so the whole thing was the same width as the bodice waistline.

Speaking of the bodice, here it is which the fit updates mentioned in the last post. The pleats were tacked down, and the waistband was sewn on by hand with running stitches.

I also decided to add ruffles to the hem of the sleeves, since they were an awkward length. The ruffles are 25″ x 4″ strips that were folded in half to create a finished edge, then I gathered the tops by hand and whip stitched them on.

I matched the seams in the skirt with the seams in the bodice, then sewed it onto the waistband.

The front edges were folded inward twice to hide the raw edges. This was sewn down by hand, with more whip stitches.

I put it back on my dress form and used pins to mark where I thought the hem should go. Then I tried it on and adjusted the hem more – I’m so, so glad I tried it on during this stage, since it was an inch shorter than I wanted!

I marked my desired hemline with pencil, then measured three inches away from that and marked another line. This left me plenty of room for a pretty hem.

I folded the dress in half and pinned all the seams together, then laid it flat. I did this because the hemline was only marked on one side and I wanted it to be symmetrical.

This is before trimming…

And after!

I transferred all my markings onto the other side of the skirt.

Then turned the raw edge inward by an inch, and inward once again at the line I drew. This left me with a 2″ deep hem.

It was sewn with whip stitches as well.

Now it was time for buttons. I spent a long time searching for suitable buttons on etsy but couldn’t find anything in my price range in the size I wanted.

So I decided to use coverable buttons. I was trying to decide between making them maroon or white when I realized another fabric I purchased in the garment district matched the stripes perfectly. I ended up using it and I really love how they look.

Before sewing them on I tried the dress on again, and marked where the snaps/hooks/bars should be. I sewed these on first, then used the buttons to cover the threads used to securing the closures to the fabric.

I also lined the waistband – here you can see some of the hooks, along with pencil markings for snaps.

In total there are seven hooks and six snaps. Hooks are placed where more support is needed – like at the collar and waistline. Snaps were used for the rest.

There are three snaps and one hook further down which keeps the skirt together – I used three more buttons to cover that stitching as well.

Here is the finished bodice. I’m really happy with how the closures for this turned out, front closures can be hit or miss but everything lines up nicely and it’s really easy to get into!

Now onto the hat! I based this on fashion plates in the catalogues I looked through when visiting McCalls. There were a lot of hats that were covered in flowers to the point where you could barely see the crown. I usually put flowers on hats, but this inspired me to go all out.

First came the paper pattern – I made a few of these before I got the “perfect” size. My original pattern is laid on top of the one I ended up using.

It was cut out of felt weight interfacing.

Then wire was sewn into the pieces.

I covered all the panels with white cotton sateen, and lined them with the striped material. For the brim I gathered the striped fabric at two points to create ruched lining, which I didn’t realize would need to be secured at the gathering point in the middle to sit properly – which left with these ugly dents in the material.

My solution to this was covering it with bias tape. Which just so happened to match the bias tape I made to bind the brim of the hat.

Here is the bias tape sewn on. In the photo above you might be able to see pencil dots, which were used as a guide when sewing it in place.

I also sewed together the crown of the hat, then sewed it to the brim.

At this point I liked the lining better than the front!

But after piling it with flowers the outer layer of the hat grew on me a lot! I wish I had only used pink flowers, and not brought in the small yellow ones. But I still really like it. I used an entire bunch of fake roses, a few sprigs of fake paisleys, fake ivy, and fake ferns. Along with a sash of silk and an ostrich feather.

I think there may be room left for a few more roses, but I haven’t decided how high I want them to go up the sides of the hat. For now I’m calling it finished.

And that’s it for this project! I’m hoping we’ll have some nice weather soon and I can photograph it against a backdrop of spring flowers. I think it would suit that environment nicely.

Overall I’m really happy with this dress. I think the silhouette turned out very nicely – slim but still obviously historical (that’s more prominent when it’s worn by a person, not a dress form). I like how easy it is to get on, and how comfortable it is to wear. I also have a ton of mobility in it – I can raise my arms all the way above my head without any snaps popping or seams ripping! So if I get attacked by bees when photographing it in front of flowers I’ll have a chance to swat them away.

(or if I ever get invited to a historical event at a theme park I’ll know which dress to bring)

Another cool thing: This dress has maybe $35 of material in it. And that’s including the hat. But I’m really tempted to buy a pair of white shoes to go with it, which would nearly double that total.

And that’s it! Thanks for reading, I should have a fabric haul with the other materials I picked up on my recent shopping trip up soon!

Making a Striped Cotton Dress, Early 20th Century

April 28, 2017March 8, 201810 Comments

I recently took a trip into the garment district, and for the first time in years I didn’t have a list of projects I was shopping for. However I did have a list of materials to keep an eye out for, and one of those was lightweight cotton.

Lightweight cottons are incredibly versatile – they can be used for foundation garments from any period, gauzy dresses from the 18th century to the mid 1800’s, and more practical pieces from the beginning of the 20th century.

I’ve always found it difficult to find lightweight, soft, yet sturdy cottons that would work for these pieces. Especially since (for me) a big part of a garment looking authentic is it’s texture – which is one of the challenges with plain cottons. They don’t have a lot of it, and garments can look cheap or flat regardless of how well constructed they are.

Which is why I really lucked out when I came across this striped cotton. It has a faded look to it, and the dots buried in the stripes add a bit of life to it. I originally thought it was red and white, but it’s more of a mauve. It’s very soft and slightly sheer – exactly what I hoped to find, and perfect for an edwardian day dress, which is what I decided to use it for!

If you read my recent Progress Report you may recall me raving over fashion plates of 20th century ladies in antique magazines, which definitely served as inspiration for this style of dress. But my main reference was this dress – it was listed on etsy, with a bunch of close ups which helped me figure out the construction.

I think the end result is pretty lovely – but let’s start at the beginning!

Step one was draping. This was tricky to drape, since I wanted the oh so glamorous pigeon breast shape, where volume from the bust carries down the the waist, which is cinched in with gathers. It’s very easy to over exaggerate this shape and end up with way too much fabric in the front.

I was also challenged by the pleats in the shoulder – they look okay here, but I was concerned the ends of the pleats would splay open when it was worn.

The back has a box pleat in it, for decoration more than anything else.

I transferred that to paper, then made a mock up. The pleats and amount of volume worked surprisingly well, so I moved on without any alterations.

I cut all the pieces out, then marked the pleats on the wrong side of the fabric with pencil. They were ironed, pinned, then sewn down by hand. I also gathered the front of the bodice pieces.

And the back. For some reason the pleat wasn’t symmetrical, which really bothers me! But I wasn’t sure how much fabric I would need for the skirt, and I didn’t want to waste any by recutting this piece, so I didn’t bother redoing it.

Then I cut out a “facing” for the collar, which will actually serve as a base for the lace trim that will be shaped into a collar.

This was pinned on top of the striped fabric to prevent the stripes from being visible through the lace.

(before doing this I sewed up the shoulder seam with a french seam)

For lace I used a gathered eyelet trim from Jo-ann’s (I removed the gathers with a seam ripper, then ironed it flat) and a lace I got in a grab bag when I went to Lancaster. I wasn’t a big fan of this combination at first, but I don’t have a lot of white lace in my collection, so my options were limited.

I sewed the lace together by hand, to create a single two inch wide unit. Then I pinned that onto the collar.

And here it is sewn down. I had to pleat and gather parts, but after ironing it looked pretty smooth. It’s a bit hard to tell with the lighting, but the closure point is on the left side of the collar, imitating the dress I based this on.

Now it was starting to look like a bodice! Since one of my goals for this was to keep it very lightweight, I decided not to fully line it.

Instead I sewed the interior seams as french seams, and created a facing that extended from the neckline to the waistline. This was cut from muslin, then pinned to the right side of the fabric. I sewed it on with a half inch seam allowance, then turned it inward to hide the raw edges. I topstitched a quarter inch away from each edge by hand to prevent the facing from shifting and peaking out. I also tacked the far edges of the facing every few inches.

Now onto sleeves! The pattern I created for this is pretty shoddy, but it worked! The sleeves have four tiers, three made from striped fabric, and one made of lace.

The top tier has the stripes going vertically, tier two has the stripes going horizontally.

Tier three is actually muslin, which the lace was sewn over, and tier four is more horizontal stripes. I’m really happy with how the sleeves turned out, I love playing with the grain lines in fabric, but it can be hard to do without wasting a lot of material – not to mention tedious. This was an easy way to sneak it in and add some interest to a simple dress.

The lace pinned together – ready to be sewn together, then onto the sleeves.

And here they are in all their glory!

I left the sleeves unlined, since none of the fabrics are prone to fraying. But I did the side seam up as a french seam.

Then the bottom edge was turned inward by a half inch. I loved working with this fabric since the stripes served as guidelines for where to sew.

The tops of the sleeves were gathered down by hand and sewn onto the bodice by machine. Then the seam allowance was whip stitched together by hand. This isn’t the cleanest finish, but it was popular in the 19th century and avoids additional bulk in an area where mobility is important – so it works for me!

Now I did a quick fitting and the end result wasn’t great. Though the pleats looked nice on my mockup, during this fitting they bunched really badly above the bust. There was a lot of folded material at the sides too, which was frustrating.

I ended up mostly fixing this by tacking the pleats down further, and tapering the ends off almost like darts. I did this with pins on the left side, which looks a lot better than the right side.

I think the folded material at the sides was caused by excess fabric in the back, which I fixed by gathering the center back portion down to be an inch and a half smaller. I also regathered the front panels so the volume was more focused at the front of the bust.

Later on I played around with foundation garments, and improved the shape even more – I found a ruffled corset cover made me look too barrel chested, but bust pads really improve the crinkling at the top of the corset.

With the fit fixed, I pinned on the waistband.

And that’s it for this post! Next up: the skirt, closures, hat, and finishing touches!