Making a Rapunzel Inspired 1820’s Dress, Part Two

It took me longer than it should have, but here is part two of making my Rapunzel inspired 1820’s dress!

If you missed part one, it can be read here. And I’ll be picking up right where I left off!

At this point, it was time for sleeves. I usually dread this part of projects because sleeves suck. But short puffy sleeves aren’t too difficult – and I had a pattern for short puffy sleeves laying around, which made the process even easier!

The pattern was originally drafted for an 1820’s dress that has a similar armscye and silhouette, luckily the proportions worked out really well for this piece too.

Here are the sleeves cut out – I would have preferred the floral design to span the entirety of the sleeves, and go vertically like the print on the bodice. But I didn’t have enough fabric for that. So I focused the print on the front portions of the sleeves.

Like the bodice, these were cut from the glittery floral overlay and satin, then sewn together before construction.

resize-0473

I gathered the sleeves by machine. The top was gathered down to 17″, and the bottoms to 12.5″. Then I attached them to a cuff, which is made from scraps of the netting and satin, trimmed down to form a 1″ strip.

I thought the sleeves were missing something, so I added a lace ruffle. resize-0475

The sleeves were sewn on to the bodice with 3/4″ seam allowances. This seam also helped secure the bands at the neckline.

resize-0485

At this point it was really coming together!

resize-0487

I bound the raw edges with some eyelet lace – I picked up a 300 yard spool of this lace, so you’ll probably see me use it as seam binding in a lot of future projects!

(also the extra is listed here – if you’re interested in it/supporting the blog!)

resize-0492

With the sleeves sorted, it was time for the skirt! I intentionally left this for last so I could use all the remaining material and get as full of a skirt as possible.

I started by straightening the short edges of my remaining satin, then I trimmed 9″ off the long edge. The end result was a 53″ x 125″ rectangle.

resize-0478

I hemmed the satin layer with horsehair, which stiffens the hem and causes the skirt to have a bit more volume. I also gathered the waistline down to 25″ to match the width of the bodice.

resize-0480

The overlay is also a rectangle, and was cut to be a half inch longer than the satin layer.

 I took some of the length off the top of the netting, and some off the bottom since I wanted the hem to follow the straight floral boarder rather than starting at a random part of the design.

I had originally intended to fussy cut around the scalloped edge of the netting and let that be the hem. But on my past couple projects that hasn’t worked out well – the skirt seems to short if you cut it so the edge of the scallops graze the ground (since the arches between the scallops are higher), and too long if you make it longer.

This netting was also just stiff enough to pickup lint and threads when it dragged across the ground, so an actual hem seemed like the best idea.

resize-0481

I ended up doing a 1/4″ rolled hem, which was stitched down by hand with whip stitches.

resize-0482

Then I sewed the back seams for these layers individually, leaving a 10″ opening at the top to serve as the closure point.

The satin layer was sewn with a french seam, since it frays, and the netting was sewn with a regular half inch seam.

I gathered the top edge of the netting as well, then sewed the layers together at the top edge. Here it is on my dress form over the appropriate petticoat.

resize-0489

Before sewing the skirt onto the bodice I added closures. The bodice closes with hooks and bars, and the skirt closes with several snaps.

resize-0496

I also basted the layers together 1.5″ away from the top edge. This is to prevent the layers from flaring up and getting caught in the waist seam as I sew it. This happens to me all the time and this does a really good job of preventing it.

resize-0495

Here are the pieces sewn together – I ended up leaving the seam allowance raw, since it wasn’t fraying much and I didn’t want to add bulk to the waistline. But I do have an abundance of purple seam binding, so I can always do that later…

resize-0498

The final step was sewing on the waistband, which is a scrap of netting that I fussy cut out. This was actually one of the first pieces I cut for this project, since I wanted to make sure I had enough material to do it and I was worried I would forget if I left it until later.

resize-0501

These two photos were taken in my sewing room, which is painted blue, so the colors are a little cooler toned than the dress is in real life.

resize-0502

And these photos are taken in my bedroom, which is ivory and red, so it makes the dress look a lot warmer toned than it is. But at least you can see it full length without a distracting background of figurines and fabric (which is what my entire sewing room is).

resize-0755

resize-0761

I also tried this dress with a few brooches, since that was how I intended it to be worn. But I like the banding detail so much, I think this takes away from the overall design.

This is the one I was originally going to use. I think the metal is too brassy.

resize-0758

And a different one, which was actually my great grandmothers. A better tone, but maybe not the right shape? What do you think?

resize-0759

And no photos of the back, since there is a 4″ gap at the waistline which doesn’t look very nice. I’ll try to get some when I take worn photos!

I think that is it for this dress! Overall it was a very fun project. It took me three days of work, and $65 worth of materials. I think it turned out beautifully – I love how it looks historical but has a fantasy element based on the fabric alone.

If I see more fabric like this in the garment district I’ll definitely snatch it up – I had so much fun working with it, and making this piece. One of the few cases where I wouldn’t mind making another one to sell.

Thanks for reading! I think my next post will be about an 18th century piece…or that progress report I promised…or a haul & store review post from a trip I recently took to PA.

Making a Rapunzel Inspired 1820’s Dress, Part One

Surprise! I’m back!

I realize it’s been a very long time since I’ve posted anything. It wasn’t my intention to be away for so long, and I don’t have a reason for the lack of updates. It just wasn’t something I was enthusiastic about doing and my last few projects weren’t documented particularly well. But I have been sewing, and I plan on doing a Progress Report soon to update you on all my WIPs and recently finished things.

But in the mean time I want to post about something I started approximately 12 hours ago. I’ve been working on a relatively elaborate 18th century piece for the last little while, but injured my wrist last week which makes lacing the stays and doing fittings very difficult.

So I decided to make something new this week. I wanted this to be something I could make quickly, not have to buy anything for, and could be worn over foundation garments I can currently get into. I also didn’t want to waste an expensive cut of silk or brocade since my “quick” projects aren’t always very well made.

In the end  I was loosely inspired by this painting and used this piece as my main reference for the dress design. I also took some inspiration from my favorite disney princess film Tangled – at least in terms of color scheme and period. For those unfamiliar with the film, Rapunzel wears light purple gowns   for both of her outfits, and her family crest is a golden sun.

A while back I bought satin and a *stunning* glitter embossed mesh because it reminded me so much of her design. And this seemed like the perfect time to use it! The film is also supposed to take place in the first third of the 19th century, so with the 1820’s references I guess you could say this is my more historically accurate take on her ensemble.

(but obviously glitter mesh isn’t quite historically accurate)

This material was from Hamed Fabrics in NYC, and was $8/yd. The glitter application and print actually reminds me a lot of the fabric used for the live action Belle dress (but prettier, in my opinion).

I’d also like to incorporate this brooch which I bought for a dollar at an antique market.

As per usual, my first step was draping the pattern. I did this out of cotton on my pinable form.  

Nothing very special about the design, though the neckline was kind of tricky. Very low and almost off the shoulder, but not quite! I drafted the back normally (rather than the exaggerated seaming seen in 1810 and the 1830s) with a separate shoulder strap.

Then I transferred everything to paper and cut out a mock up. This fit surprisingly well! The straps and bust were a little loose, but that’s an easy fix. I also ended up adding a half inch to the neckline since I thought it would be a little low after seam allowances if I left it as it was!

I dove right into cutting out the bodice. Everything was cut from once from satin (the top fabric) and again from cotton (the lining).

I also cut out mesh to use as an overlay for the back panels and straps. The mesh overlay for the front panels was draped overtop of the pieces after they were sewn together.

And here you can see that draping in action. I cut out a square I thought would be big enough for half of it, then pinned it until I was happy with it. I trimmed the edges, then removed it from the form and used it as a guide for cutting a matching piece for the other side.

Here is the overlay after being trimmed. I sewed these pieces together at the centerfront with a half inch seam allowance, then trimmed the allowance down so it would be less noticeable.

I pinned the overlay in place once again. I pinned it to the neckline and side seams first, then fiddled with the ruching at the center until I was happy with it.

Eventually I decided there wasn’t enough fabric in the ruching…so I gathered it more than originally planned. Which is why there is a big gap of fabric at the bottom of the bodice. I will cover that with a glittery waistband later.

Iremoved this from the dress form, then sewed around the overlay to secure it in place before removing any pins.

Now I could sew the bodice together. It didn’t look like much at this point!

I assembled the lining out of cotton, and sewed the seam allowance down to create boning channels.

I pinned the bodice to the lining, with the right sides facing each other. Then sewed around the neckline to secure them together. Then the bodice was turned the right way out, and I tacked around the neckline. Now it looked much better!

After a fitting I realize it was a bit too small. Luckily there was extra fabric in the center back edge, so I let it out by a half inch on either sides. Now the lining doesn’t match up with the back edge, but it’s better than the bodice not fitting!

At this point I was going to add boning to all the seams…but I forgot to sew two of boning channels. And I tacked over the center boning channels when sewing the overlay in place. So boning was only added to the side seams and the back edge. Oops.

The two dots of thread are where I tacked the overly to the under bust area. these dots, and some stitching down the center front are the only things that keep the pleating/gathering positioned.

My plan was to cover the gathering point of the overlay with the brooch, but I came across several examples of banding at the center of 1830’s bodices. Some of these also included banding on the straps, which I thought was a clever way to widen the neckline and cover seams.

 I cut some 1.5″ wide strips of mesh, folded them in half, and sewed the raw edges together with a quarter inch seam. However I quickly discovered the mesh was too delicate to turn the right way out. So instead I tacked the strips so the seam allowance was at the back of the bands and not visible.

Here they are in position. The middle one was secured by hand, and the ones on the straps will be held on by the same stitching that secures the sleeves.

And that was it for day one of making this project! I’m going to use a sleeve pattern from another project, and the skirt will be a gathered rectangle. So if all goes according to plan I can wrap this up tomorrow.

Thanks for reading!