The Making of Elsa – Frozen – Part Two

When I started this project I knew right away that the bodice would be the most challenging part of this entire costume (though not the most time consuming – that award will go to the cape, i’m sure). I thought about a lot of different methods, and had originally planned on buying a sequined material which I could use to imitate the squares on her bodice.

But after looking at a half dozen stores filled with sequins I realize that was the wrong route. Square sequins come in two different sizes, and a dozen shades of blue. But they were too sparkly to be accurate, and they weren’t rectangular enough to achieve the accurate texture of Elsa’s bodice.

I was trying to explain what I wanted outloud when I said “It’s almost like scales” and that was the Ah-ha moment! I actually know how to create scales (thanks to several ‘mermaid tail tutorials’), so although I couldn’t buy material with the design I wanted, I could make my own!

But I will talk about that more later on, my first order of business was to make the bodice.

I decided to make a mock corset, it looks like a corset, it laces like a corset, but it doesn’t have a busk and is filled with plastic boning. This way it’s more flexible then a metal boned corset and will sit on  my dress form better (a requirement for adding texture later on).

I used the block drafting method, where you divide your measurements by four and create four pieces which end up being a half mock of your body. I did this last year for my RMT corset – but it went much better this time around!

20131209_001650

I added seam allowances and cut my first mock up.

It was actually pretty decent, but a little to large in some places, and slightly small in others.

DSC_2888

I made the required alterations, then cut the pattern down so it had a more accurate shape.

DSC_2889

I was actually really happy with this, I just had to take a little off the waist.

I tore apart this mock up and marked all the alterations onto my paper pattern…it looks a lot different then when I started!

DSC_2941

Then I went ahead and cut it out, twice. One for lining, one for the top material.

DSC_2942

I sewed them all together and pressed my seams open, so I would get a very smooth finish. I added fourteen pieces of plastic boning to the lining, and then I sewed the top seam right-sides-together.

DSC_2944

Once that was done I pinned the bottom so everything lined up, and sewed bias tape on.

DSC_2945

The bias tape was hand sewed over so the edge (and interior) were finished nicely.

DSC_2946

And after that, I was ready for texture!

I started by purchasing some odd things – acrylic paints, tacky glue, a half yard of cotton canvas, crappy paintbrushes, and flexible caulking.

My original plan was to press square shaped stamps into the caulking to get the right shapes. But that did not work at all. Plan number two was digging out channels with a toothpick…but it was impossible to get the lines straight.

Finally I realized I could cut pieces of fabric and apply caulking over them to get the effect I wanted.

DSC_2935

Step one was was prepping the corset – I ironed, then lint rolled the whole thing. I wrapped plastic around my dress form and pinned the corset on as best I could.

DSC_2947Then I cut the canvas into lot’s of strips, all of varying thicknesses. Some were under a quarter of an inch wide, others were over an inch.

I also squirted out a generous amount of glue (I used the entire bottle) into a plastic container, and got an even amount of water. My set up looked like this

DSC_2952

I used a 75/25 ratio of glue to water, which I would brush onto the fabric. Then I would cut a piece of canvas, stick it to the fabric, and paint over it with a more watered down glue/water ratio to make sure the corners didn’t lift. Whenever I wasn’t using the brush, it would sit in the water so the glue residue wouldn’t dry.

Because I wasn’t drying the brush inbetween, the glue got more and more watered down as I went on.

Overall I didn’t have any issues. It’s sort of tricky since you have to be careful not to use too much water (takes ages to dry) but too much glue will really stiffen the fabric.

It’s also a really slow process.

DSC_2950

DSC_2953

DSC_2960

Once I was finished I left it overnight to dry. The the next day I popped open the back of a bottle of caulking, and used a brush to pull it from the tube. Then I painted a thick layer over the entire corset, I also ran the brush around each square to make sure they were defined.

I found one layer was enough to cover the canvas texture, but still leave each square raised slightly from the material.

After that dried I used a sponge brush to apply a base coat of acrylic paint.

DSC_2964

I’ve done a tiny bit of highlighting and lowlighting so far, but I still have a lot of painting to do (and a lot of glitter to add) before i’ll be happy with it. That’s something that will take me a while to complete, so the photos of it finished will be included in a later post.

I did end up adding grommets, seven on each side, and tied with blue satin ribbon. Overall i’m a little annoyed because it’s about an inch too large, it doesn’t give any sort of shape at all. I think I will end up taking it in an inch at the back, then adding new grommets.

But here is how it looks at the moment

DSC_2973

I’m not happy with it yet, but i’m confident I will be by the time I label it “complete”

Thanks for reading!