The Making of a French Hood

The first accessory I made to go with my tudor costume is the most famous one – a French Hood. You can see these in pretty much every portrait of royal women that were painted in the mid 1500s. I used this painting, and this one as my major shape and color references. I also used this blog post to get an idea of what shapes make up the hood, and how they are assembled. It was a major help to me and I would suggest reading it!

I had a few resources in books too, which show the variations in hood shapes.

DSC_4418

My first pattern was taken from the tudor tailor, unfortunately it didn’t work out for me. It was too small in some areas, too big in others, and all together not the shape I wanted. It took me a good hour of experimenting, but eventually I had a pattern I liked much better.

DSC_4421

I cut the crescent out of buckram and the paste out of felt weight interfacing. I would have used buckram for both pieces but I didn’t have very much on hand.

DSC_4422

Since I don’t have a sewing machine with a zig zag stitch option, I hand stitched wire around each edge of both pieces. I used a whip stitch for this, and though it was slow it turned out surprisingly sturdy! I’ve had some bad experiences with using wire in the past, but I was really happy with how smooth and easy to shape these pieces ended up being.

DSC_4423

I decided to cover the crescent with my orange silk, which was used for the kirtle. I debated about using off white silk (which was more common) but I found several paintings with orange hoods so I figured why not! Since the silk is so thin and delicate I decided to cover the crescent with a flannel weight fabric to smooth out any bumps or ridges.

I actually did this with leftovers of the imitation wool suiting that I bought for my Civil War Era dress.

DSC_4424

Then I pinned the silk overtop.

DSC_4426

And sewed it on as tightly as I could. The back looked like this.

DSC_4430

But the front looked a little better!

DSC_4429

I covered the paste with dark brown velvet, the same fabric I used for the oversleeves.

DSC_4431

Instead of making a ruffle or frill for the front I decided to use lace. This is the same lace I used on the neckline of the kirtle.

DSC_4432

As suggested in the blog post I linked above, I added a bit of padding to the area that would press against the ear. I don’t think this was really necessary (I found the hood very comfortable to wear and it didn’t press at all, even in this area) but I guess it doesn’t hurt to add this anyway.

DSC_4434

Before attaching the pieces together I cut out the lining. I used the same pattern I made earlier, but added half inch seam allowances so I could tuck the edges over. I cut my lining out of cotton gauze, since it’s very lightweight, a bit stretchy, and really easy to work with.

DSC_4435

And here the pieces are with the lining sewn in. I didn’t extend the lining all the way into the corners of the crescent because I didn’t want to add unnecessary bulk in those areas.

DSC_4436

The crescent got pinned onto the paste.

DSC_4437

Then stitched on with upholstery thread. The hood looks really lopsided at this point, but I think that’s just because the wire wasn’t bent evenly around the brim.

DSC_4439

I sewed a mixture of 6mm fake pearls and 5mm glass montees across the join point between the crescent and the paste. Each one is separated with a small orange seed bead.

DSC_4447

Then I made up a beading pattern for the top of the hood. If I had more montees I would have made it more extravagant, but at this point I was running low on them.

DSC_4453

With this part done it actually looked the way it was supposed to!

DSC_4448

I sewed the back pieces together with a cross stitch. I used upholstery thread for this to make sure it was really sturdy.

DSC_4456

Now it was time to focus on the veil. I decided to use leftover velvet so it would match the hood. I didn’t have very much velvet leftover so the hood ended up being narrower than I had planned, but it looks fine when worn!

DSC_4452

I turned the edges over by a half inch and stitched bias tape overtop to cover them. The veil should probably be fully lined but I was already worried about how the velvet would hang and didn’t want to add weight. (It ended up being fine, lining would have also been fine I think)

DSC_4454

Here is the veil with the back seam done up.

DSC_4455

It got sewn onto the back of the paste and it’s done! Overall I’m really pleased with it. If I made another I would make the crescent a little taller and the veil wider, but those are simple changes. Considering this was totally different from anything i’ve made before I’m pretty proud of it!

DSC_4458

I think the one change i’ll make is sewing combs into the sides or front. Below is my first “try on” of this costume and you can see the hood slipped really far back on my head. Traditionally they would be pinned to a coif or cap but I don’t see that working for me. The buckram is so thick that there is no way to secure it with pins, even if I had something other than hair to pin it to. So I think combs at the front are my best bet for keeping it secure!

DSC_4794resize

And that’s it for today! Thank you for reading!